POWER SUPPLIES
230V 50Hz
240V 50Hz
208V 60Hz
200V 50Hz
200V 60Hz
INPUT POWER
750VA at 230V 50Hz (PFC magnetic ballast).
SOURCE LAMP
575W discharge lamp:
- Type: General Electric CSR 575W/DE
- Cap: SFc 10-4
- Color temperature: 6.000 K
- Luminous flux: 49.000 lm
- Average life: 1.000 h
OPTICS
Elliptic reflector with high luminous efficiency
Electronic linear Zoom 15°- 30° (14,8° - 28,5°).
Electronic Focusing
COLOR SYSTEM
2 color wheels, each one with 6 pure and selected color filters (Ø 42mm) + open.
CTO and CTB filters
EFFECTS SECTION
- 2 rotating gobo wheels, each one with 6 bi-directional, indexable gobos (Ø 37,5mm).
- Selectable "Gobo shake" function.
- Morphing Effect
- All gobos are easily intercahngeable
- Fixed prism (5-facet)
- 2 frost filters.
- High speed mechanical iris.
- 0-100% dimmer on a dedicated channel.
- Stop / strobe effect.
CONTROL AND PROGRAMMING
Max 24 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD Display
Pan/Tilt Resolution: 16 bit
Gobo Indexing Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
The body of the projector can be coloured, choosing from the range of 14 colours available (minimum order: 6 pieces)
MOVING BODY
Angle:
- PAN = 450°, TILT = 252°
Max Speeds:
- PAN = 4.0 sec. (360°)
- TILT = 3.2 sec. (252°)
Resolution:
- PAN = 1.76°, PAN FINE = 0.007°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
Function reset from the lighting desk.
ON/OFF lamp control from the lighting desk.
"HELP", "MEMO", "AUTOTEST" functions
Possibility to upgrade the software through the DMX 512 input.
ETHERNET connection.
Electronic control on each parameter.
DMX level monitoring on each channel.
Feedback information for each sensor and encoder.
Electronic repositioning of the effects
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.
WORKING POSITION
Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT
35 Kg (77 lbs 2 ozs)
