POWER SUPPLIES
230V 50Hz
240V 50Hz
208V 60Hz
200V 50/60Hz
INPUT POWER
1.550VA at 230V 50Hz (PFC magnetic ballast).
SOURCE LAMP
1200W discharge lamp
- Type: Osram Sharks HTI 1200W/D7/75
- Cap: SFc 10-4
- Color temperature: 7,500 K
- Luminous flux: 110,000 lm
- Average life: 750 h
- Hot Restrike
OPTICS
Elliptic reflector with high luminous efficiency
3- step beam angle (11°; 20°; 30°).
Fresnel Lens: Ø 200 mm, focal length 250 mm.
COLOR SYSTEM
CMY Color Mixing
Linear CTO
EFFECTS SECTION
2 frost filters (20° and 30°).
Optional Ø 200 mm Diffusion Filter, with max aperture 70°, to be inserted inside the fixture (code 080382/001)
Indexable Ovalizer.
Dimmer 0-100 % on a dedicated channel.
Stop / strobe effect.
CONTROL AND PROGRAMMING
Max 14 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD Display
Pan/Tilt Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
The body of the projector can be coloured, choosing from the range of 14 colours available (minimum order: 6 pieces)
MOVING BODY
Angle:
- PAN = 450°, TILT = 252°
Max Speeds:
- PAN = 4.0 sec. (360°)
- TILT = 3.2 sec. (252°)
Resolution:
- PAN = 1.76°, PAN FINE = 0.007°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"HELP", "MEMO", "AUTOTEST" functions
Possibility to upgrade the software through the DMX 512 input.
ETHERNET connection.
Electronic control on each parameter.
DMX level monitoring on each channel.
Feedback information for each sensor and encoder.
Electronic repositioning of the effects
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.
WORKING POSITION
Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT
45 Kg (99 lbs 2 ozs)