POWER SUPPLIES
200 - 240V 50/60Hz
100 - 120V 50/60Hz
The power supply can be changed over with the built-in selector.
INPUT POWER
1550VA at 230V 50Hz (PFC electronic ballast)
SOURCE LAMP
1200W discharge lamp
- Type: Osram Sharks HTI 1200W/D7/75
- Cap: SFc 10-4
- Color temperature: 7,500 K
- Luminous flux: 110,000 lm
- Average life: 750 h
- Hot Restrike
OPTICS
Elliptic reflector with high luminous efficiency
Electronic linear zoom 15°-40°
Electronic Focusing
COLOR SYSTEM
CMY Color Mixing
6-color wheel (Ø 42mm) + open.
linear CTO.
EFFECTS SECTION
- 1 Rotating Gobo wheel with 6 bidirectional and indexable gobos (Ø 37,5mm)
- 1 wheel with 8 fixed gobos (Ø 31,5mm), at variable rotation
- Selectable "Gobo shake" function.
- "Morphing" effect.
- Fixed and rotating gobos are easily interchangeable
- Ø 120 mm Animation Disc that may be used alone or in combination with gobos, equipped with "fast clamping" system to quickly switch with other animation discs, or with Graphic Discs. The Animation Disc can be directed both vertically and horizontally: this allows the effect and its movement to be reproduced in any projection position.
- fixed prism (9-facet)
- 2 frost filters.
- High speed mechanical Iris.
- 0-100% Dimmer on dedicated channel.
- Stop / strobe effect.
CONTROL AND PROGRAMMING
Max 27 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD Display
Pan/Tilt Resolution: 16 bit
Gobo Indexing Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
The body of the projector can be coloured, choosing from the range of 14 colours available (minimum order: 6 pieces)
MOVING BODY
Angle:
- PAN = 450°, TILT = 252°
Max Speeds:
- PAN = 4.0 sec. (360°)
- TILT = 3.2 sec. (252°)
Resolution:
- PAN = 1.76°, PAN FINE = 0.007°
- TILT = 0.98°, TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
Function reset from the lighting desk.
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
115/230 V switchable power supply.
ON/OFF lamp control from the lighting desk.
"HELP", "MEMO", "AUTOTEST" functions
Possibility to upgrade the software through the DMX 512 input.
ETHERNET connection.
Electronic control on each parameter.
DMX level monitoring on each channel.
Feedback information for each sensor and encoder.
Electronic repositioning of the effects
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.
WORKING POSITION
Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT
37 Kg (81 lbs, 6 ozs)
