POWER SUPPLIES
200 - 240V 50/60Hz
INPUT POWER
2.000VA at 230V 50Hz (PFC electronic ballast).
SOURCE LAMP
1500W discharge lamp:
- Type: Osram Lok-it 1500W
- Cap: PGJ50
- Color temperature: 6,000 K
- Luminous flux: 135,000 lm
- Average life: 750 h
- Hot Restrike
OPTICS
Elliptic reflector with high luminous efficiency
4° standard beam
Electronic focusing (patented)
COLOR SYSTEM
CMY Color Mixing
6-color wheel (Ø 42mm) + open.
CTO filter.
EFFECTS SECTION
1 Rotating Gobo wheel with 6 bidirectional and indexable gobos (Ø 37,5mm)
1 wheel with 8 fixed gobos (Ø 31,5mm), at variable rotation
Selectable "Gobo shake" function.
All the fixed and rotating gobos are easily interchangeable
1 rotating prism (5 facet).
1 linear frost with high-quality micro-lens diffuser
Special high speed mechanical iris
Hybrid 0-100% dimmer (electronic + mechanical)
Stop / strobe effect.
CONTROL AND PROGRAMMING
Max 28 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Gobo Indexing Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
PAN and TILT lock for transport and maintenance.
MOVING BODY
Angle:
- PAN = 540°
- TILT = 252°
Maximum speeds
- PAN = 4.0 sec (360°)
- TILT = 3.2 sec (252°)
Resolution:
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.98°
- TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
ETHERNET Ready.
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.
WORKING POSITION
Functions in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT
40 Kg (88.18 lbs)
