044 229 69 46
096 682 43 21
 Сценический звук
 Сценический свет
 digital signage
 Public Adress
 Спецэффекты
 Конференц-системы
 Конструкции
 Аксессуары

Clay Paky Shadow QS-ST

Производитель: Clay Paky
Страна производителя: Италия
Оценить продукт:
Просмотров: 830


POWER SUPPLIES

220 - 240V 50Hz
200 - 220V 60Hz
INPUT POWER

1500VA at 230V 50Hz
SOURCE LAMP

1200W discharge lamp
- Type: Osram HMI 1200W/GS
- Cap: SFc 15,5-6
- Color temperature: 6,000 K
- Luminous flux: 110,000 lm
- Average life: 750 h
OPTICS

Twin lens condenser
High luminous efficiency spherical reflector
Standard lens: 1:2.5/250mm (11,4°)
Optional wide angle for insertion inside the projector: (24,7°)
External focusing control on front lens
COLOR SYSTEM

Wheel with 7 interchangeable color filters + open
2 color correction temperature (CTO + CTB
EFFECTS SECTION

Iris
0-100% Dimmer
Stop strobe (1-7 flash / sec).
CONTROL AND PROGRAMMING

4 DMX 512 control channels
DMX signal connection: 5 pole XLR input and output
Digital serial input RS232/423(PMX)
0-10V analog input

 

Controlling one Shadow QS only

    * Control from the built-in control panel (stand alone).
    * Total control from the remote external desk, connected to the followspot via digital or analog signal (instead of the built-in panel).
    * Both local and remote control. The built-in panel is connected up normally; the remote desk is connected to the spotlight analog input.

 

Controlling more than one Shadow QS

    * Simultaneous control of all followspots from one remote control desk. Connect the first followspot and all other units in a chain to the desk via the digital in/out sokets. All the functions will be controlled from the remote desk according to the projector addresses.
    * Simultaneous parallel control of more than one spotlight, from a single built-in control panel. Connect the first spotlight to the others in a chain via the digital in/out sockets. The control panel of the first spotlight acts as a controller for the other lights, opereating them simultaneously, with identical functioning.

BODY

In die-cast and extruded aluminium.
Epoxy powder painting.
SUPPORT

Steel bracket, with epoxy powder coated finish
Six installation positions, 25 mm apart
Bracket adjustable through 100° with graduated scale for position finding
SAFETY DEVICES

Automatic break in power supply in case of overheating
Power supply cut off automatically on opening the sidecovers.
Forced ventilation with axial fans.
WORKING POSITION

Any working position
CE MARKING

In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT

38 kg (83 lbs 10 ozs)