- Amplifier type : 8 channel, bridgeable
- Output power per channel from 20Hz to 20 kHz : 140 W
- RMS program power into 8 Ohms : 250 W
- RMS program power into 4 Ohms : 500 W
- RMS program power into 8 Ohms 2 channels bridged : minimum 4 Ohms
- Load impedance individual channels : minimum 8 Ohms
- Load impedance bridge mode : >250
- Damping factor (ref 8 ohm) : 20Hz - 20 kHz +/- 1 dB
- Frequency response : ≤ 0,15%
- Total harmonic distortion : ≤ 0,2%
- Intermodulation distortion : ≥ 65 dB
- Crosstalk : ≥ 95 dB
- Signal to noise ratio : ≥ 15V/µs
- Slew rate : Balanced Euroblock, Unbalanced RCA (cinch)
- Inputs : Both inputs are summed into mixing point
- Input impedance balanced input : 20 kOhms
- Input impedance unbalanced input : 10 kOhms
- Input sensitivity balanced & unbalanced : 0 dBv
- Routing : Linkable stereo inputs, stereo to mono mix
- Bridge mode adjacent channels only (e,g, 1&2, 3&4,,,)
- Filters : 75 Hz highpass filter, 12 dB/octave, switchable
- Ground lift switch
- Limiter : AP® limiter circuit, non defeatable
- Protection circuits : Signal limiter, overload, short-circuit, DC, overheat, softstart
- Cooling : 2 High efficiency fans with individual 3 speed control:
- Off (<50°C), Half speed (>50°C), Full speed (>70°C)
- Power supply : 230 VAC/50Hz
- Fuse : 10A slow
- Power consumption : Idle: 25 VA, Full program power 8 channels: 1600 VA
- Max peak power: 3400 VA
- Dimensions Height x Width x Depth : 132 x 483 x 484 mm
- Weight : Net: 25,3 kg (gross shipping weight 29,8 kg)
