-
The Beta 98 H/C and WB98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.
-
The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
-
Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
-
The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
- The WB98H/C features a 1.6 m (5.3ft) high-flex cable terminating in a 4-pin mini-connector, for use with wireless bodypack transmitters
- Tailored frequency response for open, natural sound reproduction
- Compact, lightweight construction provides a low degree of visibility
- Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning
- Legendary Shure ruggedness and reliability
Specifications | WB98H/C Microphone (with standard test circuit shown in User Guide Figure 1) |
BETA 98H/C Microphone (with preamplifier) |
Type | Condenser (electret bias) | |
Polar Pattern |
Unidirectional (cardioid) |
|
Frequency Response |
20 to 20,000 Hz |
|
Output Impedance | 1200 ohms | Rated at 150.0 ohms (actual) Recommended minimum load impedance: 1 kilohm. May be used with loads as low as 150 ohms with reduced clipping level. |
Output Level (0 dB = 1 volt per Pascal) |
Open Circuit Voltage: -56.5 dB (1.5 mV) | Open Circuit Voltage: -56 dB (1.6 mV) |
Output Clipping Level (at 1kHz, THD < 1%) |
-9 dBV (0.35 V) | 2.5 kilohm load: 11 dBV (3.5 V) 1.0 kilohm load: 3 dBV (1.4 V) |
Maximum SPL | 143.5 dB | 2.5 kilohm load: 163 dB 1.0 kilohm load: 155 dB |
Dynamic Range (maximum SPL to A-weighted noise level) | 112.5 dB | 132 dB (2.5 kilohm load) |
Signal-to-noise ratio | 63 dB at 94 dB SPL (IEC 651) | |
Polarity | Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground). | Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector. |
Recommended Operating Voltage | 5 V (pin 2 to pins 3 and 4) | 11 to 52 Vdc Phantom |
Environmental Conditions | Operating temperatures: -7 degrees C to 49 degrees C (20 degrees F to 120 degrees F) Storage temperatures: 29 degrees C to +74 degrees C (-20 degrees F to 165 degrees F) Relative Humidity: 0 to 95% |
|
Net Weight | Microphone w/cable and mini-connector (TA4F): 65 g (2.3 oz.) | Microphone w/cable and preamplifier: 156 g (5.5 oz.) |